$5,550.00 $4,995.00

Categories: , , Tag: Product ID: 1695

Description

The ULTRA is the top of the line GFI Professional Series pedal steel guitar.

 GFI ULTRA :  S-10PU, RED Mica…DEMO

Here is the Top of the Line GFI ULTRA Pedal steel guitar. It has had a few demos, I’ve used it on a couple of gigs for promotional purposes…Excellent, New-Mint Condition…but as it has had a few plays, I’m knocking 10% off the price. Full Warranty still applies. Best NEW pedal steel deal in NZ!

FEATURES

  • Fully optioned 10 string, Emmons setup
  • 4 Pedals and 5 Knee Levers (one Vertical)
  • Arm rest/Pad
  • Keyless Tuners
  • Brushed Aluminum Finish with Durable Epoxy Clear Coating
  • Maple Die Board Bodies with Gloss Laminate Finish
  • 24” Scale
  • Stainless Steel Changer Fingers
  • One Piece Key Heads
  • Grover Keys
  • GFI-II Pickup(s)
  • Triple Raise, Double Lower Changers
  • 7 Position Bell Cranks
  • Adjustable Lowering Springs
  • Deflection Minimizing Crossrod Bearing Caps
  • Stainless Steel Screws, Pull Rods, and Pedal Rods
  • Denim Leg Bag, 3/16” Hex Tuning Wrench, 5/64” Allen Wrench
  • Hardshell Carpet Covered Case
  • Keyless Tuners
  • Tuning knobs remain level.
  • Twin shafts provide a perfectly balanced leverage ratio.
  • Fine tuning is much more precise than with keys.
  • Available lever movement is more than twice the amount required for a more than adequate safety margin.
  • No roller nut is required as there is no measurable movement at the nut.
  • The problem of returning to pitch when raising and lowering the same string is virtually eliminated.
  • No tools are required for tuning, however, a Phillips screwdriver is required when changing strings (no more lost Allen wrenches).

GFI offers the ultimate in keyless tuning for pedal steel guitars.

  • Tuning knobs remain level.
  • Twin shafts provide a perfectly balanced leverage ratio.
  • Fine tuning is much more precise than with keys.
  • Available lever movement is more than twice the amount required for a more than adequate safety margin.
  • No roller nut is required as there is no measurable movement at the nut.
  • The problem of returning to pitch when raising and lowering the same string is virtually eliminated.
  • No tools are required for tuning, however, a Phillips screwdriver is required when changing strings (no more lost Allen wrenches).
  • Knobs are shaped to accept an 11 mm socket.

Reviews

There are no reviews yet.

Be the first to review “GFI ULTRA S-10PU, 4+5 – KEYLESS”

Your email address will not be published. Required fields are marked *